Category: Company


Beriev Be-200ChS Altair

Beriev Design Bureau was established in 1934 and is the synonym for the amphibian aircraft not only in Russia but on the world level as well. While most of the amphibians were propeller driven like WW2 era MBR-2 and Cold War Be-6 ‘Madge’ and Be-12 ‘Mail’ aka ‘Chaika’ with the advent of jet age, the constructors soon started to look into application of jet engines on amphibian aircraft. R-1 was the first experimental jet powered amphibian in the early ’50s with the Be-10 entering service later in the decade. Later in the ’70s, Beriev teamed up with Bartini for the experimental futuristic looking VVA-14 of which two prototypes were built. The next Beriev’s jet amphibian project was A-40 Albatros; developed in the ’80s only one prototype was finished with another in the works, when Soviet Union collapsed and the financial crisis shelved further development. To this day, the A-40 is the biggest jet-powered amphibian in the world and the single prototype set 140 world records. It’s current status is unknown as there were some reports of order for the Russian Navy.

be1

Beriev Be-200 is based on the A-40 Albatros design and entered service in 2003. It’s name, ‘Altair’, has two meanings – one is the name of the star in ‘Eagle’ constellation. The other one is the acronym for Al (as Albatros A-40), ta (Taganrog – the place where sea trials take place) and ir (Irkut – the production place). The aircraft is mainly used in firefighting role for which it can carry up to 12 tonnes of water but can also be used as maritime patrol, search and rescue, cargo and passenger roles, seating up to 72 passengers. While the aircraft was built in Irkut, the production line has recently moved to Taganrog.

Be-200s are currently in service with the Russian Ministry of Emergency Situations and Azerbaijan with further orders from Russian MoD and China. It’s first operational use was in 2004 on Italian Sardinia, fighting the forest fires with the Italian services. The success of the operations saw the Be-200s used in Italy, Portugal, Indonesia, Greece, Israel, Serbia and Russia.

be2

The kit

EE’s Be-200 kit is a typical short run kit. Inconsistent panel lines (engraved though), clunky details and ill fit on most of the parts were plaguing this build. But I have to admit it is not that bad in the end. Engines, although rather complex to assemble, represent nicely the depth of D-436TP turbofans. While it is certainly not a ‘shake and bake’ kit, with a little bit of putty, sanding sticks and patience, the lump of plastic can be built into a nice miniature of this unique aircraft. Decals, although flat, are really thin and get into the engraved details without the need of setting solutions. The only inaccuracy I noticed were the main gear doors. They are designed to be attached to the sides of the well and close towards each other. Reference photos show, that they are actually hinged at the front of the wells and close backward. There’s also a third small door covering the forward support strut. I’ve scratchbuilt the missing doors and attached the others according to photographs. Oh, and don’t forget to add a lot of nose weight – the more the better. All in all, despite some problems during construction, this was a rather pleasurable build and brought me another unique looking aircraft into my collection.

 

Model Data
Company: Eastern Express
Scale: 1:144
Aftermarket: /
Paints used: Mr.Paint (MRP-4 White, MRP-41 Red, MRP-45 Dark Blue, MRP-186 Light Grey)

cover

Sukhoi Su-30 ‘Flankers’ are a two-seat multi-role derivative of the famous Su-27 fighter. There are two main versions of Su-30s. Irkut plant produces the canard and TVC equipped Su-30MK series (in use with Algeria, India, Malaysia, Russia), while the Komsomolsk-on-Amur KnAAZ (ex-KnAAPO) plant until recently produced the Su-30MK2 series, which don’t have canards and TVC engines but are easily recognizable by taller, straight tipped vertical fins and are in use with China, Indonesia, Vietnam, Venezuela, Uganda and in smaller numbers with Russian Air Force. Supposedly Su-30M2s in the Russian Air Force serve as training aircraft for the single-seat Su-27SM multi-role fighters.

su-30m2-504_04_big

Pavel Sukhoi

pavel_sukhoi

Pavel Osipovich Sukhoi was born in 1895 in near the now Belorussian town of Vitebsk. In 1915 he went to Moscow’s Technical School but with the outbreak of World War 1 he was drafted into the Imperial Russian Army and was discharged in 1920 and in 1925 finally graduated. In the same year he started working as designer/engineer with TsAGI aviation institute and in the following years designed aircraft like record breaking Tupolev ANT-25 and TB-1 and TB-3 bombers. His career then rose to top positions at TsAGI and in the late ’30s he designed a light multipurpose aircraft Su-2. In September 1939, Pavel established his own design bureau (OKB) and he designed an excellent ground attack aircraft but with Stalin’s preference to Il-2, Su-6 didn’t see mass production. In 1949, his OKB was closed on Stalin’s order and Pavel had to work as Tupolev’s lead designer, but in 1953, after Stalin’s death, Sukhoi OKB was reestablish. His first successful design was Su-7 fighter-bomber which was the main aircraft of the type in 1960s, while the derivatives Su-9, Su-11 and the Su-15 formed the backbone of the interceptor units. Sukhoi OKB was also pioneering the variable-sweep design, creating Su-17 and Su-24 series of attack aircraft. One of his most ambitious projects was a Mach-3 bomber called T-4 Sotka. Pavel Sukhoi’s last design was T-10 (Su-27) but unfortunately he died in 1975 and did not see it fly.

The kit

Trumpeter’s Su-27 kits are widely available now for a few years and while they are not expensive and are readily available, most of them share several mistakes. One of the worst and basically impossible to correct is the wrong cross-section of the forward fuselage towards the nose, making the aircraft look to thin and LERX’ ending too early. The other mistake is that the main landing gear wells are posed at an angle when they should be level. Su-30MKK kit I used as a basis also has the problem that the vertical fins are too short and had to be replaced or modified. While not really difficult to build, there are some problematic areas that could be avoided by Trumpeter, especially the wing insert on the bottom of the wing.

When I first saw the photos of this memorial scheme, carried by 4th Su-30M2 prototype (Red 504), I had to build it as a tribute to a great aviation designer. When Caracal decals announced release of decals, including this scheme, I was thrilled as I could finally recreate this bird. Unfortunately, the decal application process was not a great experience. Despite being printed by Cartograf, which normally produce decals of highest quality, Caracal decals were very thick, prone to silvering, did not lay down into recessed details well and were not responding to setting solutions well. Painting diagrams can also be misleading. Unfortunately there’s just a few photos of the real aircraft, as it carried this scheme only for a short amount of time. The black colour of Mr. Sukhoi’s jacket is printed black while it should be Dark Gray. Despite all the problems, I somehow managed to pull it off and create another new Flanker for my Flanker collection.

Model Data
Company: Trumpeter
Scale: 1:72
Aftermarket: Caracal models decals, Master pitot tube, DreamModel replacement fins
Paints used: Mr.Paint (MRP-4 White, MRP-5 Black, MRP-32 Green for wheels, MRP-42 Red, MRP-47 Dark Gray, MRP-98 Light Gull Grey, MRP-196 Light Blue, MRP-198 Light Gray)
Alclad (ALC-101 Aluminum, ALC-104 Pale Burnt Metal, ALC-111 Magnesium, ALC-123 Exhaust Manifold, ALC-416 Hotmetal Sepia)

su30m2_cover

MiG-29 9.13 ‘Fulcrum-C’; Swifts

Mikoyan MiG-29 doesn’t need a special introduction. One of the most famous (and feared by the West) 4th generation jet fighters in the world, it first flew in 1977 and entered service with Soviet Air Force in 1982. Designed to replace the MiG-23 in Frontal Aviation units, the requirement to operate from rugged, damaged or unprepared runways resulted in reinforced landing gear and anti-FOD measures, including the mudguard and closing jet intakes with auxiliary intakes on the top of leading edge root extension.
First version to be put into service was MiG-29A, which was externally recognized by having small ventral stabilizers (like Su-27 series) and different landing gear and airbrake design. MiG-29B which soon followed was built in more than 800 examples, a lot of them downgraded for export, which are still in use today in many air forces including Serbia, India, Bulgaria, Iran, to name but a few.
The next upgrade that happened in the ’80s was the so called izdeliye 9.13, which is also the subject of this build. MiG-29S 9.13 ‘Fulcrum-C’ introduced an enlarged dorsal hump, which is the most recognizable feature compared to 9.12. 9.13 could carry the longer ranged air-to-air R-27ER missile, the enlarged dorsal hump carries an active radar jammer as well as additional fuel and the airframe strengthening brought the total armament capability to 4.000kg. This version also included an improved flight control system slightly improving maneuverability.

16

Swifts / Strizhi / Стрижи

The beginnings of aerobatic group Strizhi go back to the late ’80s, when a group of pilots started training in precision formation flying through aerobatic maneuvers with their debut performance on May 6th, 1991 and their international debut a few months later at an airshow in Sweden. In the beginning, the group performed with 9.12 version of MiG-29, painted in white and blue, but later switched to 9.13 and repainted their aircraft into current scheme of red and white with blue swift symbol on top and bottom of the aircraft. UB (9.51) twoseaters were also used in both liveries. Strizhi recently celebrated their 25th anniversary and Zvezda celebrated this event by releasing their new 9.13 kit with Strizhi markings and box artwork.The team is based, like the Russian Knights Flanker equipped team at Kubinka Air Base and usually performs as a 5- or 6-ship while a 4-ship flight usually flies with a 5-ship Russian Knights team during celebrations of special events, like the 9th May parade over the Red Square in Moscow.

171

The kit

There isn’t much to say to this kit, that I haven’t already said in my previous in-progress threads (PART1, PART2). Despite some small shortcomings, the kit is really a joy to build, is accurate and it’s the first MiG-29 kit in 1:72 that has correctly depicted open jet intakes and closed auxiliary intakes. The later are open only when the aircraft is on ground and the engines are running (from start-up to take-off and from landing to shutting down the engines). The engraved detail is well defined if a bit shallow, mostly on the curved surfaces like LERX. There are no engraved rivets present but I don’t mind that, as they are more often than not over emphasized and don’t look real. With a multitude of riveting tools present today on the market, making you own shouldn’t be a problem. If building the Swifts version, the easiest way of applying the top decals would be to wait with vertical stabilizers installation until after decaling. Decals themselves proved excellent, thin enough and didn’t require any setting solutions. All in all, an excellent kit and I’ll be sure adding a few more to my collection.

Model Data
Company: Zvezda
Scale: 1:72
Aftermarket: none
Paints used: Mr.Paint (MRP-4 White, MRP-45 Dark Blue, MRP-98 Light Gull Grey), Revell (36 Red, enamel)
Alclad (ALC-101 Aluminum, ALC-104 Pale Burnt Metal, ALC-111 Magnesium, ALC-123 Exhaust Manifold, ALC-405 Transparent Smoke, ALC-416 Hotmetal Sepia)

cover-1

 

Antonov An-71 ‘Madcap’ was based on the popular An-72 STOL transport series. The aircraft needed only 620m for take-off and 420m for landing and could operate from rough unpaved runways. Over-wing mounted engines greatly reduced FOD risk but also improved its STOL capabilities.

Only three An-71 were made with the first take-off in 1985. Unlike An-72, An-71 was equipped with more powerful engines and was also equipped with a third, fuselage mounted jet engine of the same type as Yak-38, that helped with take-offs. Rear fuselage was redesigned and a broad, forward swept fin installed with a radar dome mounted on top.

During the times of Soviet Union, each aviation branch had its own Early Warning Radar system in use which it didn’t share with others. So while the PVO (main fighter/interceptor and SAM branch) was equipped with A-50 AWACS, VVS-FA (frontal aviation) strike fighters lacked the capability and the An-71 was developed. There was also a carrier borne version considered under the designation An-75 but it remained a paper project. The two flying prototypes flew around 1.000 hours but the problems with the radar and the eventual fall of the Soviet Union killed the project.

an71

The kit

I picked up this kit really cheap in Club-TM shop on one of my trips to Moscow. I didn’t have much expectations of this 1:288 Eastern Express kit but in the end, I really enjoyed building it. The fit is rather good, but the plastic is somewhat weird, as the seams were constantly cracking open, as if the solvent wouldn’t work on it (I washed it before building!). The panel lines are engraved although somewhat heavy for the little scale. Decals went down fine, but I had many problems with the size and had to trim them while I couldn’t get a perfect cheat line on the right side of the model. Landing gear are a thing of fiction and the wheels are WAAAAY too small. You get a nice display stand with the kit though.

Model Data
Company: Eastern Express
Scale: 1:288
Aftermarket: none
Paints used: Mr.Paint (MRP-4 White, MRP-5 Black, MRP-38 Light Gray, MRP-42 Red, MRP-47 Dark Gray, MRP-105 USN Modern Blue Gray)
Alclad (ALC-101 Aluminum)

title

an71-11

Polikarpov Po-2VS

Po-2, also nicknamed ‘Kukuruznik’ and less known under its NATO designation ‘Maule’, was designed in the 1920’s and went into production in 1928. It is one of the most produced aircraft in the history with exact number unknown, but believed to be somewhere between 20.000 and 30.000 airframes. It’s initial purpose was for training new pilots, but the impending Second World War transformed the trainer into a light bomber, reconnaissance, liaison and psychological warfare aircraft. Initially designated as U-2, it was renamed into Po-2 after its designer, Nikolai Polikarpov, died in 1944. U/Po-2VS was a designation for militarized aircraft, which was armed with a rear facing machine gun for self protection and 4 bomb pylons that could carry 50kg or 100kg bombs. Its combat use has not ended with the fall of the German Reich though. During the Korean War, N. Koreans used Po-2s in similar fashion as the Soviets did during the WW2 and with some great successes. Po-2 is also the only biplane credited with a jet kill – USAF F-94 Starfire intercepted low and slow flying Po-2 and while trying to engage, the pilot of the jet fighter slowed below the stall speed and crashed.

Russland, erbeutetes Flugzeug Po-2

Night Witches

The Po-2 became most known by a group of women. In October 1941, Stalin issued an order to establish three women aviation regiments – a fighter, bomber and night bomber one. 588th NBAP, night bomber regiment, was the only to be an all woman regiment, including the ground crews. Consisting of young volunteers, 588th started their operations in the spring of 1942 and continued until the war was over. As of recognition to their success, they were later in 1943 renamed to 46th ‘Taman’ Guards Night Bomber regiment. They flew precision bombing as well as harassment sorties, denying German soldiers the well needed sleep. The standard procedure during those attacks was to switch of the engine, glide over the enemy positions, drop bombs and then retreat. These stealth attacks earned them a German nickname ‘Nachthexen’ – the Night Witches. 588th/46th was one of the most highly decorated aviation regiments of the WW2!

Commander: Yevodkiya Bershanskaya
Combat Missions: more than 24.000
Dates of service: 27 May 1942 – 15 October 1945
Theaters of operation: Donetsk, Mozdok, Terek Valley, Kuban, Krasnodar, Novorossiysk, Kerch, Sevastopol, Minsk, Warsaw, Berlin
Female pilots: 61
Female navigators: 63
Female staff and political officers: 24
Female ground crew: 99
Heroes of the Soviet Union: 24

588nbap

The kit

ICM released this kit in 2012. Although there has been KP and its copies on the market since at least 1975, a modern tooling Po-2 in 1:72 was long overdue. Plastic is molded really nicely with beautiful surface details, leaving KP kit literally 40 years behind. The fit of the kit is generally good, though one has to be careful with many tiny parts. Special care has to be taken with the vertical stabilizer assembly as it is molded extremely thin and the result is very weak attachment to the tail. The known mistake of this kit is its propeller – it is turned the wrong way – Quickboost offers a simple and cheap replacement. Rigging was done with Uschi Van Der Rosten 0.02mm elastic rigging thread – but looking at the reference photos, some bigger diameter might be better. Anyhow, this model was built for my lovely wife. She got interested in Night Witches upon hearing the song Night Witches by a Swedish metal band Sabaton, which you can hear in the below link.

 

title

And here she is, proud owner of the Night Witches’ Po-2 model!mimi-1

Su-33 EggFlanker

A fun quick build to test the Su-33 line of Mr.Paint paints.

Hasegawa 1:egg scale Sukhoi Su-33 Sea Flanker.

Northrop XP-79B

XP-79B is one of the Northrop’s lesser known flying wing designs. Jack Northrop conceived the aircraft in 1942 as a rocket powered fighter, which would destroy enemy aircraft (primarily bombers) by ramming into them. The aircraft featured several advanced solutions – pilot would be flying in prone position to be able to sustain higher G loads, while the airframe would be constructed by welded magnesium instead of usual riveted aluminum, as the volatile rocket fuel would corrode the later too quickly.

xp-79b_01

To test the radical design, several full scale glider models were built, which started testing in 1944. As the rocket testing turned out to be unsatisfactory, the aircraft was instead equipped with Westinghouse 19-B turbojets.

The first flight of the XP-79B was also its last. After days of taxi runs at Muroc Dry Lake (today’s Edwards AFB), the aircraft finally took off on 12th September 1945. 15 minutes into flight, the aircraft performed a slow roll, uncontrollably pitched nose down and crashed in vertical spin. Test pilot Harry Crosby attempted to bail out, but was hit by the tail and died on impact. As the result of the crash, the second prototype as well as the project were cancelled.

RS MODELS 1:72 Northrop XP-79B

cover

RS Models’ XP-79B is a typical short run kit. While not a multimedia kit, some experience is still needed to achieve best result. The surface of the plastic is not smooth – it actually reminds of a very fine sanding paper – some polishing is required before painting. Instructions call out for the Yellow Zinc Chromate as the interior color, but I guess Interior Green is safer bet. Another wrong color call out is for the exterior paint – RS Models suggest you paint the model white. A few available photos show that the surface was darker (compared to the white on the stars&bars), so I used a light grey, similar to the one used on P-80s. Construction is pretty straightforward and probably the most tricky part of assembly is the two-piece canopy. It was a two piece on the real aircraft as well, but the short run nature of the kit and the complex contour make a perfect fit almost impossible. Some blending in with a water soluble putty was required. Unfortunately due to the rather thick plastic and the curve, due to the light refraction, the join line is too pronounced.

Model was finished with Mr.Paint paints and finishes.

 

Saab 210 Draken

Swedish aviation designs have always been one of a kind and looking at the Saab J-35 Draken, 60 years after its maiden flight, the double-delta wing design still makes it look futuristic. As it was such a revolutionary design, Saab decided to build a 70% scale prototype to test the flight characteristics of such design. This was the only time, Saab designed a prototype testbed for any of its aircraft designs.

SAAB-210

Saab 210 performed its first take-off on 21st January 1952 in the hands of a test pilot Bengt Olow. The main goal was to test the flight characteristics at low speeds. Over the course of four years, the prototype made over 1.000 flights. With the revelation of J-35, the Saab 210 got an unofficial nickname of Lill-Draken (Little Dragon). The intake design was changed during the testing, my model representing the initial configuration. The aircraft can be now seen on display at Air Force museum in Linköping, Sweden.

PLANET MODELS 1:72 Saab 210-I Lilldraken “Initial Configuration”

saab210-1-2

As this is quite an obscure aviation subject, chances are we will never see it in the injection molded form. But fear not – Planet Models deliver the kit in both Initial and Final configuration. Keep in mind though, that we are talking about a true multimedia kit – landing gear in white metal, canopy in vacform and all the rest in resin, which makes building this little model quite challenging. The resin itself is of great quality – no evident air bubble holes, finely engraved, thin edges. Unfortunately, building it was not as easy. The whole cockpit/front fuselage is too low, which creates quite a big step on the lower side of the fuselage. The same thing goes for the intakes as well. A lot of puttying and sanding had to be done to blend in all the steps. The fit of the intakes on the top also gave me troubles which even resulted in sanding through the top of the nose, followed by a lengthy repair works. Vacform canopy is also quite tricky to attach and lots of trimming was required along with the addition to canopy rail guides that fixed it in place. As for the accuracy goes – I don’t have any plans to compare it to, but according to the few available photos, the canopy appears slightly too long and not as bubbly as on the real thing. The front section from the windshield to the nose might also be slightly too long.

Model was finished with Alclad paints for the metal finish and Mr.Paint for Black and lacquer finishes.

Mikoyan MiG-31BM ‘Foxhound’

MiG-31 ‘Foxhound’ is a supersonic interceptor aircraft developed in the late 1970s for the use with Soviet Air Forces. It is an evolution of a legendary MiG-25 ‘Foxbat’ interceptor. After its first flight in 1981, it has entered the service in large numbers (more than 500 aircraft), protecting the vast borders of the Soviet Union. After the end of Cold War and breakup of the SU, the remaining aircraft continue to serve with the Russian and Kazakhstan Air Forces.

166988
Copyright – Yurij Vladimirovich – full res photo at http://russianplanes.net/id173408

MiG-31 is very capable interceptor. Using the datalink, four aircraft could cover the area 800-900km in length and could intercept cruise missiles, UAVs, all kinds of aircraft at any altitude. It’s great speed of M2.83, powerful radar with detection of 200km and IRST and advanced targeting computer that could track 10 targets and attack 4 of them in combination with Vympel R-33 long-range missiles, made the ‘Foxhound’ a really dangerous foe.

MiG-31BM (and BSM in case of aircraft without in-flight refueling capability) is an improved upgraded version of the baseline B version. It’s radar’s range was increased to 320km and its weapons computer can track 24 targets and simultaneously attack 6 of them. Its datalink system was improved, so it can interact not only with MiG-31s but also with other fighters and even surface-to-air missile batteries. BMs received new partially digital cockpits as a part of the upgrade. The most noticeable external differences between the B and BM are rear view mirror on the pilot’s canopy and 4 smaller under wing pylons instead of 2 larger. MiG-31BMs do not carry R-40 and R-60 missiles anymore, but they are equipped with short-range R-73s for self protection and medium-range R-77s, which are just entering service with the Russian Air Force.

Avantgarde Model Kits 1:48 MiG-31BM/BSM ‘Foxhound’

cover.jpg

There is little more that I can say about this kit. If you have followed this build through the last 3 months (you can still check the in progress posts up in the menu), you know what can be expected. I will first point out the “bad” things – panel lines could be slightly narrower, weak landing gear, no decals for the instrument panels (corrected for the upcoming B/BS kit), no photo-etched seat harnesses (corrected for the upcoming B/BS kit), omission of some smaller antennas (that could be included on PE fret) and there might be some other smaller details that have slipped my mind (but are noted in the in progress posts). Apart from these, as you can see rather trivial things, the kit is a joy to build. Very little filler was used, parts are nicely detailed, from the landing gear wells and struts up to missiles, exhausts and cockpit. If you don’t dig into the details, you can actually finish one in under a month.

It took me three months to finish this model. A lot of time was spent on searching for references and cross checking them with kit parts and painting little details, which will probably never be seen anyway. This model was also my first contact with the new Mr.Paint range of acrylic lacquers and all I can say is that I am sold! Hundreds of hours of work later, I can safely say that was my biggest modelling achievement yet and I am very thankful to AMK for sending me this sample and I hope, that I have done this kit a justice.

Tips on recreating realistic model

Each aircraft has a unique weathering scheme – check sites like russianplanes.net and airliners.net for reference photos. AMK give you multiplay display options, especially regarding maneuvering surfaces. If you are modelling your aircraft parked, slats and flaps should be in the up position. Flaps are deployed only during take-off and landing, while slats are deployed only during air-refueling. Horizontal stabilizers should be posed either neutal/level or with trailing edge slightly dropped. Air-refueling probe is most likely stowed, but can be deployed sometimes. IRST sensor is stowed 99% of time. Weapons system operators forward periscope can be either stowed or deployed.

Stepan Karnach

The model represents MiG-31BM ‘Foxhound’, Red 37, RF-90901 based at Novosibirsk airport in 2015. The aircraft carriers the name of a Hero of the Soviet Union awardee pilot Stepan Karnach. More photos of Red 37: http://russianplanes.net/regs/RF-90901

karnach_30573_s

Stepan Andreyevich Karnach was born in 1918. He graduated from the pilots school in 1940. He fought in the Great Patriotic War since its beginning in June 1941. He was fighting on Southern, Krim and Steppe fronts flying initially the I-16 fighter. On 9th August 1943, he rammed his fighter into a Bf109 fighter and safely landed his damaged plane. On 4th February 1944, he was awarded the Hero of the Soviet Union and Order of Lenin awards for flying 270 combat sorties, 70 air battles, 12 personal kills and 4 shared kills. After that, he served on 1st and 2nd Ukrainian fronts and finished the WW2 with 346 combat missions, 84 air battles, 16 personal and 4 shared kills. After the war, he continued his career in the Air Force until his retirement, reaching the rank of General-Major. He died in 1991 in Odessa.

 

Bell AH-1G Cobra

AH-1G is considered to be the first operational attack helicopter in the world. Although previous attempts at attack helicopters were made in the past, it was the Vietnam war and the need for escorting the Air Cavalry UH-1 Hueys, that gave birth to AH-1G. Sharing many components with the UH-1C, it started replacing the UH-1B and UH-1C gunships in mid-1967. Between 1967 and 1973, around 1100 AH-1Gs were delivered, serving in close air support, escorting transport helicopters and other roles, including the ‘hunter-killer’ roles in combination with OH-6A scout helicopters.

cobra-32

Bell AH-1G Cobra
s/n 67-15536
Thor’s Hammer
A-Troop, 7th Squadron, 1st Cavalry
Pilot CW2 Melton Lee Hinton
Tra Vinh, Vietnam, 1971-72

Special Hobby 1:72
SH72076
Brengun Photoetched Set