Tag Archive: 1:350

K-560 Severodvinsk is the first submarine of the new Russian Yasen class of nuclear powered attack subs. It is supposed to replace both Akula class SSNs as well as Oscar class SSGNs.

Construction work started in 1993 but due to the Russian financial crisis of the ’90s after the break-up of the Soviet Union, work on the newest sub restarted in 2003. Unfortunately launch date slipped even further when in the second half of decade, the Borei SSBNs were given a priority and Severodvinsk made its first sail and sea trials in September 2011, with official introduction to the Russian Navy in May 2014. There are 5 Yasen class submarines under construction at the moment, with the 6th scheduled for summer next year.

The submarine is equipped with the latest sensors and weapons of the Russian Navy. Besides 650mm and 530mm torpedoes, this sub also carries the latest anti-ship and anti-submarine missiles, cruise missiles, land-attack cruise missiles and mines. The heart of the sensor suite is spherical sonar MGK-600 Irtysh-Amfora mounted in the forward hull – the reason why the torpedo launchers were moved to the sides. The crew consists of only 90 sailors – 44 less than comparable USN Virginia class.

The kit

Modern nuclear submarines are quick and easy models to build and Yasen is no different. It goes together quite nicely but there is a hull long seam to take care of and unfortunately torpedo tubes are right in the way of it, so some care has to be taken of. Yasen subs are all grey – very dark grey. To break apart the monotonous single scheme, I’ve used an off-black paint as a basis and black for the sonar parts. I’ve noticed a tile pattern on one of the close up photos and tried to recreate that as well to even further break up the all grey scheme and I am quite happy with the result. Unfortunately the biggest fault of this kit are decals – especially the one on the bow as it doesn’t contour the shape of the bow well – I thought it was my fault but after checking several other builds on the internet, I’ve seen every modeller was struggling with that. That apart, it is a really nice kit and a welcome addition to any modern sub collection.

Model Data
Company: HobbyBoss
Scale: 1:350
Aftermarket: /
Paints used: Mr.Paint (MRP-4 White, MRP-5 Black, MRP-173 Tire/Rubber)
Alclad (ALC-101 Aluminum, ALC-104 Pale Burnt Metal, ALC-110 Copper)



Here she is finished. Not a lot of problems encountered during this build – you can see in progress photos, by selecting WIP up from the menu.















And at the end comparison between the first Soviet boomer and the latest Russian one – quite a difference, ain’t it? 😉


And here’s the trailer for the movie K-19: Widowmaker that vaguely represents what happened on that tragic 1961 voyage starring Harisson Ford and Liam Neeson.


Model was first smeared with White and Payne’s Gray artist’s oil colours.



Later the oily mess was wiped away – first with paper tissue and then followed by straking an old paintbrush down the hull.



Letting the paint dry further a bit, random streaks of Burnt Sienna were added to simulate light rusting.



White was also used for lightening the deck colour and provide for some discolouration.

Browsing through the net you will most likely find most of this sub models painted in classic black hull with dark red bottom, but I’ve decided to paint her in her early scheme, probably also the one she wear during the 1961 tragedy.


Image source: http://the60sat50.blogspot.com/2011/07/tuesday-july-4-1961-k-19-nuclear.html


Model was sprayed with Aclad Grey Primer first and as I found it to be quite a nice colour for the upper hull I masked it off and sprayed Revell 37 ‘Reddish Brown’ for the lower hull. Top deck was painted with Revell 9 Anthrazite


Further the sub was given 3 coats of Alclad Aqua Gloss to achieve nice even surface for decalling, which went on mostly without much problems. Only the silver decals for the sonar? were giving me a bit of a problem – I had to cut the upper one in half to get a better angle and then trim it.


With a dryfitted conning tower she almost looks the part already. But not yet – the most important steps is yet to follow – the weathering that should make it more life-like and less toy-like.

K-19 was one of the first Soviet nuclear powered submarines and that could carry and fire ballistic nuclear missiles. The sub was commisioned in 1961 and its bad luck began a couple of years before that, as the bottle of champagne didn’t break upon christening the hull, and rather bounced of the rubber coating. Even before commisioning people died during construction and there was an accident on the boat which required nuclear reactor repair. During sea trials in 1960, a number of failures and accidents caused a few floodings and a loss of one crew member on seperate occasion. In 1961 the nuclear accident happened which made this sub infamous worldwide, claiming lives of heroic sailors that prevented nuclear catastrophe and earned her a “Hiroshima” nickname. In the ’70s and ’80s a few dozens of sailors died due to the fires and she was finally decommisioned in 1990 and scrapped in 2003.


Image source: http://sunnycv.com/steve/filmnotes/k19.html

The kit I use for this project is Flagman in 1:350 scale. I strongly believe the moulds are the same as Zvezda’s from several years ago. The plastic has a textured look and some mould imperfections can be seen but on modern subs, these are easily sanded away as there is little detail on the hull. The part count is small and as such this should be a quick and easy build.


By glueing together just 4 parts, you already have a hull finished – ain’t that nice?!


The dryfit of the conning tower shows a perfect fit, which enables me to fit it later.


I used Alclad Grey Primer that was shot over the join lines as black plastic is a little hard on the eyes to spot any potential mistakes that need to be sanded


Two holes were drilled at the location of the conning tower and sprue rods attached for easier handling of the model during painting stages.




I’ve added the railing around the conning tower – Flagman suggests using streched sprue but I find 0.3mm solder wire much more easier to work with, especially curving it around the tower.